ADI MAX5070BASA+

MAX5070BASA+ Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 10.8V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 20kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "MAX5070" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 2A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 49.8 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 1MHz Hz. A circuit should contain 30V in order to ensure the voltage regulator dc to dc runs safely and reliably. As long as the dc switching is in a dormant state, it utilizes 37?A. It is possible to set the input voltage as 26.5V for nominal working statuses. In order to limit the voltage of a dc switcher whose maximum input voltage is 26.5V, it must be limited by the user. The supply current of the voltage controller is 32?A. 3mA current flow input could be used to operate the switching converter .

MAX5070BASA+ Features

Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 49.8 %
Frequency: 1MHz

MAX5070BASA+ Applications

There are a lot of Maxim Integrated
MAX5070BASA+ DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery