ADI MAX4701ETE+T

Manufacturer No:

MAX4701ETE+T

Manufacturer:

ADI

Package:

16-WFQFN Exposed Pad

Description:

35ns, 20ns DPDT 75Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4701 16 Pins 500pA 3V 16-WFQFN Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX4701ETE+T information

ADI MAX4701ETE+T technical specifications, attributes, parameters and parts with similar specifications to ADI MAX4701ETE+T.

Type
Parameter

Factory Lead Time
6 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-WFQFN Exposed Pad

Number of Pins
16

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2009

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Resistance
75Ohm

Subcategory
Multiplexer or Switches

Max Power Dissipation
444mW

Technology
CMOS

Terminal Position
QUAD

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
3V

Terminal Pitch
0.5mm

Base Part Number
MAX4701

Pin Count
16

Polarity
Non-Inverting

Power Supplies
3/5V

Number of Channels
2

Number of Circuits
2

Max Supply Voltage
5.5V

Min Supply Voltage
1.8V

Operating Supply Current
1?A

Nominal Supply Current
1?A

Turn On Delay Time
20 ns

Supply Type
Single

Turn-Off Delay Time
35 ns

-3db Bandwidth
250MHz

On-State Resistance (Max)
75Ohm

High Level Output Current
20mA

Multiplexer/Demultiplexer Circuit
2:2

Off-state Isolation-Nom
76 dB

Current - Leakage (IS(off)) (Max)
500pA

Channel Capacitance (CS(off), CD(off))
8pF

On-state Resistance Match-Nom
2Ohm

Switch Circuit
DPDT

Switch Time (Ton, Toff) (Max)
35ns, 20ns

Download datasheets and manufacturer documentation for ADI MAX4701ETE+T.

MAX4701ETE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-WFQFN Exposed Pad. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:2. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A DPDT switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Try searching with MAX4701 if you're looking for variants. There is 75Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.8V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1?A current would be sufficient. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply.

MAX4701ETE+T Features

2 Channels
Switch Circuit: DPDT
1?A Supply Current
-3db Bandwidth: 250MHz

MAX4701ETE+T Applications

There are a lot of Maxim Integrated
MAX4701ETE+T Analog Switches & Multiplexers ICs applications.

Transmit
Low-Voltage
Isolation
Medical
Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.