ADI MAX4644EUT+T

Manufacturer No:

MAX4644EUT+T

Manufacturer:

ADI

Package:

SOT-23-6

Description:

15ns, 5ns SPDT 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4644 6 Pins 250pA 3V SOT-23-6

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX4644EUT+T information

ADI MAX4644EUT+T technical specifications, attributes, parameters and parts with similar specifications to ADI MAX4644EUT+T.

Type
Parameter

Factory Lead Time
6 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
SOT-23-6

Number of Pins
6

Weight
36.003894mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2011

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
6

ECCN Code
EAR99

Resistance
4Ohm

Additional Feature
CAN ALSO OPERATE WITH 5V SUPPLY

Subcategory
Multiplexer or Switches

Max Power Dissipation
696mW

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Supply Voltage
3V

Terminal Pitch
0.95mm

Base Part Number
MAX4644

Pin Count
6

Number of Channels
1

Voltage
5V

Number of Circuits
1

Max Supply Voltage
5.5V

Min Supply Voltage
1.8V

Operating Supply Current
1?A

Max Supply Current
1?A

Number of Bits
2

Turn On Delay Time
15 ns

Supply Type
Single

Turn-Off Delay Time
5 ns

On-State Resistance (Max)
4Ohm

High Level Output Current
50mA

Multiplexer/Demultiplexer Circuit
2:1

Off-state Isolation-Nom
55 dB

Current - Leakage (IS(off)) (Max)
250pA

Channel Capacitance (CS(off), CD(off))
12pF

On-state Resistance Match-Nom
0.1Ohm

Switch Circuit
SPDT

Download datasheets and manufacturer documentation for ADI MAX4644EUT+T.

MAX4644EUT+T Overview

The electrical component comes in SOT-23-6 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 6 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. Into the electrical component body are injected 6 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4644. A 4Ohm internal resistance characterizes this multiplexer. The datasheets for the 6 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.8V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 1?A current. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. A voltage higher than 1?A may cause damage to the switch multiplexer. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5V SUPPLY. 2-bit operation is possible.

MAX4644EUT+T Features

1 Channels
Switch Circuit: SPDT
1?A Supply Current
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
2-Bit

MAX4644EUT+T Applications

There are a lot of Maxim Integrated
MAX4644EUT+T Analog Switches & Multiplexers ICs applications.

Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.