ADI MAX4536CSE

Manufacturer No:

MAX4536CSE

Manufacturer:

ADI

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

100ns, 50ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4536 16 Pins 2nA 5V 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX4536CSE information

ADI MAX4536CSE technical specifications, attributes, parameters and parts with similar specifications to ADI MAX4536CSE.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Operating Temperature
0°C~70°C TA

Packaging
Tube

Published
1996

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Resistance
100Ohm

Terminal Finish
Tin/Lead (Sn85Pb15)

Subcategory
Multiplexer or Switches

Max Power Dissipation
696mW

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
1.27mm

Time@Peak Reflow Temperature-Max (s)
20

Base Part Number
MAX4536

Pin Count
16

JESD-30 Code
R-PDSO-G16

Power Supplies
3/+-5V

Number of Channels
1

Number of Circuits
4

Max Supply Voltage
6V

Min Supply Voltage
2V

Operating Supply Current
1?A

Nominal Supply Current
50nA

Max Supply Current
1?A

Throw Configuration
SPST

Turn On Delay Time
100 ns

Voltage - Supply, Single/Dual (±)
2V~12V ±2V~6V

Supply Type
Dual, Single

Neg Supply Voltage-Nom (Vsup)
-5V

Turn-Off Delay Time
50 ns

Max Dual Supply Voltage
6V

On-State Resistance (Max)
100Ohm

Min Dual Supply Voltage
2V

Multiplexer/Demultiplexer Circuit
1:1

Off-state Isolation-Nom
65 dB

Current - Leakage (IS(off)) (Max)
2nA

Channel Capacitance (CS(off), CD(off))
2pF 2pF

Download datasheets and manufacturer documentation for ADI MAX4536CSE.

Datasheets:

maximintegrated-max4538cee-datasheets-4349.pdf

maximintegrated-max5858aecmd-datasheets-5095.pdf

maximintegrated-max4536cse-datasheets-4662.pdf

ConflictMineralStatement:

maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf

MAX4536CSE Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. 4 circuits are used in this analogue multiplexer. Try searching for MAX4536 variants of the analog switch ic. Analog switches have 100Ohm internal resistance. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 6V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. It would be sufficient to run this analogue multiplexer with 1?A current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1?A. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. The voltage should be at least 2V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.

MAX4536CSE Features

1 Channels
Switch Circuit: SPST - NO
1?A Supply Current

MAX4536CSE Applications

There are a lot of Maxim Integrated
MAX4536CSE Analog Switches & Multiplexers ICs applications.

Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.