ADI MAX4351EKA+T

Manufacturer No:

MAX4351EKA+T

Manufacturer:

ADI

Package:

SOT-23-8

Description:

80mA per Channel 70 dB Instrumentational OP Amps 8 Pins SOT-23-8

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX4351EKA+T information

ADI MAX4351EKA+T technical specifications, attributes, parameters and parts with similar specifications to ADI MAX4351EKA+T.

Type
Parameter

Factory Lead Time
6 Weeks

Mount
Surface Mount

Package / Case
SOT-23-8

Number of Pins
8

Packaging
Strip

Published
2002

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Tin (Sn)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Pin Count
8

Power Supplies
+-5V

Temperature Grade
INDUSTRIAL

Number of Circuits
2

Max Supply Voltage
11V

Min Supply Voltage
9V

Operating Supply Current
6.9mA

Slew Rate
485 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
70 dB

Output Current per Channel
80mA

Input Offset Voltage (Vos)
1mV

Bandwidth
210MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Voltage Gain
60dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
5.5V

Low-Bias
NO

Micropower
NO

-3db Bandwidth
210MHz

Min Dual Supply Voltage
4.5V

Download datasheets and manufacturer documentation for ADI MAX4351EKA+T.

Datasheets:

maximintegrated-max5858aecmd-datasheets-5095.pdf

ConflictMineralStatement:

maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf

MAX4351EKA+T Overview

The linear amplifier is packaged in a SOT-23-8 case. This is a OPERATIONAL AMPLIFIER type op amp. Linear amplifier is delivered in a Strip case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 1mV. This op amp can operate from a supply current at 6.9mA. Voltage gain should remain at 60dB. There are 2 circuits on this op amp. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 85°C. TAPE AND REEL is adopted to pack the instrumentation amplifier. With regard to the supply voltage, this electrical component is capable of working from under 11V. It is advised to keep the op amp's supply voltage higher than 9V. You should conduct this electronic component under the dual supply voltage of 5.5V.

MAX4351EKA+T Features

8 Pins
supply voltage of 5V
60dB voltage gain

MAX4351EKA+T Applications

There are a lot of Maxim Integrated
MAX4351EKA+T Instrumentational OP Amps applications.

Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.