ADI MAX3471EUA+

Manufacturer No:

MAX3471EUA+

Manufacturer:

ADI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

8 Terminations 8 Pin MAX3471 Receivers 1 Bits 1/1 Drivers/Receivers 1 Functions

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX3471EUA+ information

ADI MAX3471EUA+ technical specifications, attributes, parameters and parts with similar specifications to ADI MAX3471EUA+.

Type
Parameter

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tube

Published
1998

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Type
Transceiver

Terminal Finish
Matte Tin (Sn)

Subcategory
Line Driver or Receivers

Max Power Dissipation
362mW

Technology
CMOS

Voltage - Supply
2.5V~5.5V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Terminal Pitch
0.65mm

Base Part Number
MAX3471

Pin Count
8

Output Type
Adjustable

Power Supplies
3/5V

Interface
RS-422, RS-485

Operating Supply Current
1.6?A

Nominal Supply Current
100?A

Data Rate
64Kbps

Differential Output
YES

Protocol
RS422, RS485

Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER

Number of Drivers/Receivers
1/1

Driver Number of Bits
1

Receiver Number of Bits
1

Duplex
Half

Receiver Hysteresis
32mV

Number of Transceivers
1

Simplex/Duplex
Half Duplex

Transmit Delay-Max
2000 ns

Output Low Current-Max
0.0022A

Out Swing-Min
0.2 V

Height
1.1mm

Download datasheets and manufacturer documentation for ADI MAX3471EUA+.

MAX3471EUA+ Overview

This driver chip is excellent for driving common LEDs due to its enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 2.5V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 3.6V.Wide receiver has 8 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number MAX3471 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There is one driver IC that is designed to operate from a 3/5V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 1.6?A.

MAX3471EUA+ Features

Tube package
8 pin count
8 pins
3/5V power supply

MAX3471EUA+ Applications

There are a lot of Maxim Integrated
MAX3471EUA+ Drivers/Receivers/Transceivers applications.

Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
Car radio
Satellite radio receiver

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.