Microchip MAX24288ETK2

Manufacturer No:

MAX24288ETK2

Manufacturer:

Microchip

Package:

68-WFQFN Exposed Pad

Description:

IEEE 1588 Clock and Packet Timestamper and 1Gbps Parallel-to-Serial MII Converter

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX24288ETK2 information

Microchip MAX24288ETK2 technical specifications, attributes, parameters and parts with similar specifications to Microchip MAX24288ETK2.

Type
Parameter

Supply Voltage
1.2/3.3

Output Voltage
3.3

Package
68 TQFN

Output
Serial: 1000BASE-X or SGMII v1.8 (4, 6, or 8 Pin)

Channels
Single

Data Rate Capability
IEEE1588

Input
Parallel: GMII, RGMII, or 10/100 MII

Download datasheets and manufacturer documentation for Microchip MAX24288ETK2.

Data Sheets:

65ca946915a972a90a4d6d3d7df3dd55.pdf

The MAX24288 is a flexible, low-cost IEEE 1588 clock and timestamper with an SGMII or 1000BASE-X serial interface and a parallel MII interface that can be configured for GMII, RGMII, or 10/100 MII. The device provides all required hardware support for high-accuracy time and frequency synchronization using the IEEE 1588 Precision Time Protocol. In both the transmit and receive directions 1588 packets are identified and timestamped with high precision. System software makes use of these timestamps to determine the time offset between the system and its timing master. Software can then correct any time error by steering the device's 1588 clock subsystem appropriately. The device provides the necessary I/O to time-synchronize with a 1588 master elsewhere in the same system or to be the master to which slave components can synchronize.

In addition, the MAX24288 is a full-featured, 10/100/1000 Mbps parallel-to-serial MII converter. It provides full SGMII revision 1.8 compliance and also interfaces directly to 1Gbps 1000BASE-X SFP optical modules.

Applications/Uses

1588-Enabled Equipment with 1G Ethernet Ports
Industrial and Factory Automation Equipment
Medical Equipment
Pseudowire Circuit Emulation Equipment
Switches, Routers, DSLAMs, PON Equipment
Test and Measurement Systems
Wireless Base Stations and Controllers

Complete Hardware Support for IEEE 1588

Ordinary, Boundary, and Transparent Clocks

Flexible Block for Any 1588 Architecture

1588 Clock Hardware

Steerable by Software with 2-8ns Time Resolution and 2-32ns Period Resolution

1ns Input Timestamp Accuracy and Output Edge Placement Accuracy

Three Time/Frequency Controls: Direct Time Write, Time Adjustment, and High-Resolution Frequency Adjustment

Programmable Clock and Time-Alignment I/O

Input Event Timestamper Detects Incoming Time Alignment (e.g., 1 PPS) or Clock Edges

Output Event Generator Provides Output Clock Signal or Time Alignment Signal

Built-In Support for Telecom Equipment Timing Architecture with Dual Redundant Timing Cards

1588 Timestamping Hardware

1588 v1 and v2 Packets, Transmit and Receive

Packet Classifier Supports 1588 Over Ethernet, IPv4/UDP, IPv6/UDP, or MPLS and Is Programmable for More Complex Stacks

Supports 802.1Q VLAN Tags and MAC-in-MAC

One-Step Operation: On-the-Fly Timestamp Insertion or Transparent Clock Corrections; No Need for Follow-Up Packets

Can Insert All Timestamps, Receive and Transmit, Into Packets for Easy Software Access

Optional Two-Step Operation

Parallel-to-Serial MII Conversion

Bidirectional Wire-Speed Interface Conversion

Serial: 1000BASE-X or SGMII v1.8 (4, 6, or 8 Pin)

Parallel: GMII, RGMII, or 10/100 MII

Translates Link Speed and Duplex Mode Negotiation Between MDIO and SGMII PCS

Full Support for 1588 + Synchronous Ethernet

MDIO and SPI™ Interfaces

1.2V Operation with 3.3V I/O

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.