ADI MAX1922ESA+T

Manufacturer No:

MAX1922ESA+T

Manufacturer:

ADI

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

3/5V P-Channel PMIC MAX1922 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX1922ESA+T information

ADI MAX1922ESA+T technical specifications, attributes, parameters and parts with similar specifications to ADI MAX1922ESA+T.

Type
Parameter

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2009

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Additional Feature
UNDERVOLTAGE LOCKOUT

Subcategory
Power Management Circuits

Technology
BICMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
8

Number of Outputs
1

Output Type
P-Channel

Supply Voltage-Max (Vsup)
5.5V

Power Supplies
3/5V

Supply Voltage-Min (Vsup)
2.7V

Number of Channels
1

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Current - Output (Max)
1A

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
2.7V~5.5V

Adjustable Threshold
NO

Input Type
Non-Inverting

Switch Type
USB Switch

Supply Current-Max (Isup)
0.025mA

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Fault Protection
Current Limiting (Fixed), Over Temperature, UVLO

Rds On (Typ)
70m ?

Length
4.9mm

Width
3.9mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for ADI MAX1922ESA+T.

Datasheets:

maximintegrated-max1922etb-datasheets-6414.pdf

maximintegrated-max5858aecmd-datasheets-5095.pdf

ConflictMineralStatement:

maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf

MAX1922ESA+T Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of 2.7V~5.5V, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.As you can see, it comes from the MAX1922 family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 1AV.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 8 pins.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.It has a power supply of 3/5V.In addition, UNDERVOLTAGE LOCKOUT can be produced using this LED driving board.In order to operate at its maximum capacity, the supply current must not exceed 0.025mA.

MAX1922ESA+T Features

Supplied from 5V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT

MAX1922ESA+T Applications

There are a lot of Maxim Integrated
MAX1922ESA+T Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.