M74HC4316RM13TR-ST-Price, Stock & Datasheet

M74HC4316RM13TR Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. A 4 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Try searching for M74HC43 variants of the analog switch ic. Analog switches have 70Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 12V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1?A. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.