M74HC374RM13TR-ST-Price, Stock & Datasheet

M74HC374RM13TR Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 2V~6V. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74HCseries of FPGAs. You should not exceed 90MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 4?A quiescent energy. A total of 20 terminations have been made. You can search similar parts based on M74HC374. A voltage of 4.5V is used to power it. The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. 8bits are used in its design. There is a 6Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch operates on 2/6V volts. The D flip flop is embedded with 2ports. In order to operate, the chip has 3 output lines.