M74HC173RM13TR-ST-Price, Stock & Datasheet

M74HC173RM13TR Overview

It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 84MHz. D latch consists of 1 elements. It consumes 4?A of quiescent current without being affected by external factors. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to M74HC173 family. It is powered from a supply voltage of 4.5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 4 Bits. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. 4 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It operates from 2/6V power supplies. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to ?1? and are available to encode either a decimal or hexadecimal input pattern to typically a binary or ?B. C. D? (binary coded decimal) output code.