M74HC173B1R-ST-Price, Stock & Datasheet

M74HC173B1R Overview

The item is packaged in 16-DIP (0.300, 7.62mm)cases. D flip flop is included in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Through Holeis in the way of this electric part. The supply voltage is set to 2V~6V. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74HCseries of FPGAs. You should not exceed 84MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 4?A quiescent energy. A total of 16 terminations have been made. You can search similar parts based on M74HC173. A voltage of 4.5V is used to power it. The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Through Hole. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. 4bits are used in its design. There is a 6Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 4 circuits to achieve it. The D latch operates on 2/6V volts. In order to operate, the chip has 3 output lines. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE; WITH DUAL OUTPUT ENABLE.