ADI LTC1345CSW#PBF

LTC1345CSW#PBF Overview

This LED driver IC features an enhanced SOIC-28 package for driving common LEDs.The receiver is packaged in a Rail/Tube package.As a Single Chip can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.75V ~ 5.25V for power supply.There can be up to 2/3 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at 0°C ~ 70°C.It is packaged with 28 pinouts that are market standard for this particular transceiver.A 28-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.Using this ic receiver, you were able to achieve a resolution of 3 bits.It is typical for this receiver to have a resolution of 3 bits when it is specified.An input voltage supply of 5 V is required to operate the transceiver module.Interface ICs is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5 V.There are 1 transceivers implemented in this module isolated transceiver.In module isolated transceiver are 3 receivers.The integrator circuit is embedded with 3 drivers.There must be a transceiver module's temperature below 70 °C during operation.There must be at least 0 °C minimum operating temperature for this optical transceiver.The PROGRAMMABLE DTE/DCE; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS; 3 RECEIVERS ACTIVE UNDER SHUTDOWN function of this optical transceiver module improves the overall stability and accuracy of signal management.The VCC pin of the ic receiver should receive enough but not more than 170 mA of input current.Using the input voltage of 118 mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.This IC has a transceiver's maximum supply voltage of 5.25 V.LINE TRANSCEIVER, the interface IC type of ic receiver, is used to control and manage the sharing of information between devices.3 transmitters are used in telecommunications to transmit or send data using radio waves.This line driver ic requires a minimum supply voltage of 4.75 V to function properly.There is a 28-SOIC supplier package that is used for this wide receiver.A power-saving technique is used in this integrating circuit, whintegrating circuith belongs to the LTC1345 series.This optical transceiver is embedded with 6 Channel channels in total.In addition to the external terminals, this rf transceiver module has 28 terminals.

LTC1345CSW#PBF Features

Rail/Tube package
28 pin count
28 pins
5 V power supply
LTC1345 series
6 Channel channels
28 terminals used for its configuration

LTC1345CSW#PBF Applications

There are a lot of Analog Devices
LTC1345CSW#PBF Drivers/Receivers/Transceivers applications.

• Cell phones
• Wireless modems
• Remote controls
• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook