LTC1069-1CN8#PBF-ADI-Price, Stock & Datasheet

LTC1069-1CN8#PBF Overview

As far as packaging is concerned, it comes in a 8-DIP (0.300, 7.62mm) package.There is a Tube package that comes with it.I would like to point out that the gadget has a Through Hole mounting type.In this case, the part's filter type is Elliptic, Low Pass Switched Capacitor.I believe it should be able to work with a power source of ±1.57V~5.5V, if it works at all.8-pins are used in total on this board.LTC1069 is the best component of the device, because it is the most important part of the device.There is either a cutoff or a center frequency in the device when it is operating at 12kHz frequency.As the peak reflow temperature reaches NOT SPECIFIED, the reflow process begins.There is always a source of 5V being used to power the component at all times.Filter is important that Filter is warmer than 0°C when Filter is in operation.There is currently a maximum working temperature of 70°C in the system.There is no change in the pin number of the component, as 8 remains the same.There are a number of 8 terminals present on the device.Circuits of the 1 type exist.This device has the capability of handling a maximum supply temperature of 5.5mA.A Through Hole mount package is included with the Through Hole mount package, and you will be able to use it.In this DC DC switching regulator, the supply voltage will be 9V, and it will operate off of that voltage.A voltage of 5.5V must be applied to the device in order for it to function properly.The device requires a voltage supply of 1.57V in order to function properly.