ADI LT1353CS#PBF

Manufacturer No:

LT1353CS#PBF

Manufacturer:

ADI

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

20nA 86 dB Instrumentational OP Amps 0.075μA ±2.5V~15V LT1353 14 Pins 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LT1353CS#PBF information

ADI LT1353CS#PBF technical specifications, attributes, parameters and parts with similar specifications to ADI LT1353CS#PBF.

Type
Parameter

Factory Lead Time
8 Weeks

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Operating Temperature
0°C~70°C

Packaging
Tube

Series
C-Load™

Published
2003

JESD-609 Code
e3

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
1.27mm

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
LT1353

Qualification Status
Not Qualified

Power Supplies
+-2.5/+-15V

Number of Circuits
4

Current - Supply
250μA

Slew Rate
200V/μs

Amplifier Type
Voltage Feedback

Common Mode Rejection Ratio
86 dB

Current - Input Bias
20nA

Voltage - Supply, Single/Dual (±)
±2.5V~15V

Gain Bandwidth Product
3MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Unity Gain BW-Nom
2700 kHz

Average Bias Current-Max (IIB)
0.075μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
18V

Voltage - Input Offset
200μV

Current - Output / Channel
13.4mA

Micropower
YES

Bias Current-Max (IIB) @25C
0.05μA

Neg Supply Voltage-Max (Vsup)
-18V

Voltage Gain-Min
8000

Height Seated (Max)
1.752mm

Download datasheets and manufacturer documentation for ADI LT1353CS#PBF.

Datasheets:

lineartechnologyanalogdevices-lt1353cstrpbf-datasheets-9706.pdf

LT1353CS#PBF Overview

In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. A instrumentation amplifier like this has 4 circuits. There is a recommendation that this electrical part be used with a supply with 250μA current rating. In this case, C-Load™ represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 8000.

LT1353CS#PBF Features

14 Pins
supply voltage of 5V

LT1353CS#PBF Applications

There are a lot of Linear Technology/Analog Devices
LT1353CS#PBF Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.