ST LS404CDT

Manufacturer No:

LS404CDT

Manufacturer:

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 23mA per Channel 100nA 86 dB Instrumentational OP Amps 0.3μA 15V LS404 14 Pins 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LS404CDT information

ST LS404CDT technical specifications, attributes, parameters and parts with similar specifications to ST LS404CDT.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Number of Pins
14

Operating Temperature
0°C~70°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
15V

Time@Peak Reflow Temperature-Max (s)
40

Base Part Number
LS404

Pin Count
14

Number of Channels
2

Number of Circuits
4

Max Supply Voltage
36V

Min Supply Voltage
6V

Operating Supply Current
1.5mA

Nominal Supply Current
3mA

Power Dissipation
400mW

Output Current
23mA

Slew Rate
1V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
86 dB

Current - Input Bias
100nA

Output Current per Channel
23mA

Input Offset Voltage (Vos)
5mV

Gain Bandwidth Product
2.5MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
2500 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.3μA

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
500μV

Download datasheets and manufacturer documentation for ST LS404CDT.

Datasheets:

stmicroelectronics-ls404idt-datasheets-0921.pdf

LS404CDT Overview

There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. The input offset voltage is 5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 1.5mA . It is recommended to keep the voltage gain at 100dB at all times. This op amp contains 4 circuits. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TAPE AND REEL axis. Under 36V is the minimum supply voltage for this electric component. Over 6V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.

LS404CDT Features

14 Pins
supply voltage of 15V
100dB voltage gain

LS404CDT Applications

There are a lot of STMicroelectronics
LS404CDT Instrumentational OP Amps applications.

Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.