TI LMV824ID

Manufacturer No:

LMV824ID

Manufacturer:

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

4 Channels 45mA per Channel 40nA 72 dB Instrumentational OP Amps 2.5V~5.5V ±1.25V~2.75V LMV824 14 Pins 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LMV824ID information

TI LMV824ID technical specifications, attributes, parameters and parts with similar specifications to TI LMV824ID.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Number of Pins
14

Operating Temperature
-40°C~125°C

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
2.7V

Terminal Pitch
1.27mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
LMV824

Pin Count
14

Output Type
Rail-to-Rail

Power Supplies
2.5/5V

Number of Channels
4

Operating Supply Current
1mA

Nominal Supply Current
1.3mA

Output Current
45mA

Slew Rate
1.9V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
72 dB

Current - Input Bias
40nA

Voltage - Supply, Single/Dual (±)
2.5V~5.5V ±1.25V~2.75V

Output Current per Channel
45mA

Input Offset Voltage (Vos)
3.5mV

Bandwidth
5.5MHz

Unity Gain BW-Nom
5000 kHz

Voltage Gain
105dB

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
5.5V

Voltage - Input Offset
1mV

Low-Bias
NO

Micropower
YES

Download datasheets and manufacturer documentation for TI LMV824ID.

Datasheets:

texasinstruments-lmv822dgkr-datasheets-0176.pdf

LMV824ID Overview

Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 3.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 105dB is the best course of action. 4 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.

LMV824ID Features

14 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail

LMV824ID Applications

There are a lot of Texas Instruments
LMV824ID Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.