ST LMV822IQ2T

Manufacturer No:

LMV822IQ2T

Manufacturer:

Package:

8-UFDFN Exposed Pad

Description:

70mA per Channel 60nA 72 dB Instrumentational OP Amps 2.5V~5.5V LMV822 8 Pins 8-UFDFN Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LMV822IQ2T information

ST LMV822IQ2T technical specifications, attributes, parameters and parts with similar specifications to ST LMV822IQ2T.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-UFDFN Exposed Pad

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e3

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn) - annealed

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
2.7V

Terminal Pitch
0.5mm

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
LMV822

Pin Count
8

Number of Elements
2

Operating Supply Current
300?A

Nominal Supply Current
300?A

Output Current
5mA

Slew Rate
1.9V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
72 dB

Current - Input Bias
60nA

Voltage - Supply, Single/Dual (±)
2.5V~5.5V

Output Current per Channel
70mA

Input Offset Voltage (Vos)
3.5mV

Bandwidth
5.5MHz

Unity Gain BW-Nom
5500 kHz

Voltage Gain
100dB

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Low-Bias
NO

Micropower
YES

Programmable Power
NO

Power
NO

Height Seated (Max)
0.6mm

Download datasheets and manufacturer documentation for ST LMV822IQ2T.

Datasheets:

stmicroelectronics-lmv822idt-datasheets-6756.pdf

stmicroelectronics-lmv822iq2t-datasheets-3011.pdf

stmicroelectronics-lmv822iq2t-datasheets-3012.pdf

LMV822IQ2T Overview

A 8-UFDFN Exposed Pad case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 300?A volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 100dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The instrumentation amplifier is packed in the form of TAPE AND REEL.

LMV822IQ2T Features

8 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail

LMV822IQ2T Applications

There are a lot of STMicroelectronics
LMV822IQ2T Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.