TI LMV711IDBVRG4

Manufacturer No:

LMV711IDBVRG4

Manufacturer:

Package:

SOT-23-6

Description:

40mA per Channel 4pA 50 dB Instrumentational OP Amps 5V 2.7V~5.5V LMV711 6 Pins SOT-23-6

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LMV711IDBVRG4 information

TI LMV711IDBVRG4 technical specifications, attributes, parameters and parts with similar specifications to TI LMV711IDBVRG4.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
SOT-23-6

Number of Pins
6

Operating Temperature
-40°C~85°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
6

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BICMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
2.7V

Terminal Pitch
0.95mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
6

Qualification Status
Not Qualified

Output Type
Rail-to-Rail

Operating Supply Voltage
5V

Number of Circuits
1

Operating Supply Current
1.17mA

Nominal Supply Current
1.7mA

Output Current
40mA

Slew Rate
5V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
50 dB

Current - Input Bias
4pA

Voltage - Supply, Single/Dual (±)
2.7V~5.5V

Output Current per Channel
40mA

Input Offset Voltage (Vos)
400μV

Bandwidth
5MHz

Unity Gain BW-Nom
5000 kHz

Voltage Gain
123dB

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Low-Bias
YES

Download datasheets and manufacturer documentation for TI LMV711IDBVRG4.

Datasheets:

texasinstruments-lmv710idbvr-datasheets-0378.pdf

LMV711IDBVRG4 Overview

There is a SOT-23-6 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. In total, there are 6 pins on this op amp ic. This linear amplifier should be powered by an 2.7V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 6 pins are located on the operational amplifiers. The input offset voltage is 400μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1.17mA . It is recommended to keep the voltage gain at 123dB at all times. This op amp contains 1 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. This linear amplifier pack is based on the TAPE AND REEL axis.

LMV711IDBVRG4 Features

6 Pins
supply voltage of 2.7V
123dB voltage gain
Output Type: Rail-to-Rail

LMV711IDBVRG4 Applications

There are a lot of Texas Instruments
LMV711IDBVRG4 Instrumentational OP Amps applications.

Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.