LMK3H2104A02LRGER-Texas Instruments-Price, Stock & Datasheet

LMK3H2104 is a BAW-based clock generator that does not require any external XTAL or XO. The device can be used as PCIe clock generator or general purpose clock generator. The 2 FODs (Fractional Output Divider) provide frequency flexibility, low power and low jitter at the same time.

LMK3H2104 has up to 4 differential outputs plus 2 LVCMOS outputs or up to 10 LVCMOS outputs. The device also has one clock input. The clock input provides clock multiplexing and buffering ability. Each output bank can independently select any clock source.

The GPI and GPIO pins provide additional control flexibility. These pins can be configured as individual OE, grouped OE, I2C address selection, OTP page selection, PWRGD/PWRDN#, status output and other functions.

The device supports one-time programmable (OTP) non-volatile memory which can be customized and factory preprogrammed.

Integrated BAW resonator
- No need for external XTAL/XO
Flexible output frequency
- 2 fraction output dividers (FOD), individual channel dividers
- Up to 400MHz output frequency
Flexible output format
- 1.2/1.8/2.5/3.3V LVCMOS
- DC- or AC-coupled LVDS
- LP-HCSL with programmable swing. LVPECL, CML and other formats can be derived from LP-HCSL
Very low jitter
- 61fs max PCIe Gen 5 CC with SSC jitter
- 36.4fs max PCIe Gen 6 CC with SSC jitter
- 25.5fs max PCIe Gen 7 CC with SSC jitter
PCIe Gen 1 to Gen 7 compliant
Configurable SSC
- Programmable -0.05% to -3% down spread and ±0.025% to ±1.5% center spread, or preset -0.1%, -0.25%, -0.3% and -0.5% down spread
1 input (LMK3H2104) that can be bypassed to any output
5ms max startup time
Fail-safe input pins can be pulled high when device power is off
Flexible power supply
- Each VDD pin can be independently connected to = 1.8, 2.5 or 3.3V
- Each VDDO pin can be independently connected set to 1.8, 2.5 or 3.3V
-40 to 105°C ambient temperature