TI LM747J/883

Manufacturer No:

LM747J/883

Manufacturer:

TI

Package:

CDIP

Description:

2 Channels 500nA 70 dB Instrumentational OP Amps 1.5μA 14 Pins CDIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LM747J/883 information

TI LM747J/883 technical specifications, attributes, parameters and parts with similar specifications to TI LM747J/883.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 day ago)

Contact Plating
Lead, Tin

Mount
Through Hole

Package / Case
CDIP

Number of Pins
14

Packaging
Rail/Tube

JESD-609 Code
e0

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Tin/Lead (Sn/Pb)

Max Operating Temperature
125°C

Min Operating Temperature
-55°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Number of Functions
2

Supply Voltage
15V

Pin Count
14

Power Supplies
+-15V

Temperature Grade
MILITARY

Number of Channels
2

Max Supply Voltage
22V

Min Supply Voltage
10V

Power Dissipation
800mW

Current - Output
25mA

Slew Rate
0.5 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
70 dB

Current - Input Bias
500nA

Input Offset Voltage (Vos)
5mV

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
1500 kHz

Voltage Gain
106.02dB

Average Bias Current-Max (IIB)
1.5μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
22V

Low-Bias
NO

Micropower
NO

Bias Current-Max (IIB) @25C
0.5μA

Programmable Power
NO

Screening Level
MIL-STD-883

Wideband
NO

Height
5.08mm

Length
19.56mm

Download datasheets and manufacturer documentation for TI LM747J/883.

LM747J/883 Overview

It is packaged in an CDIP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 5mV for input offset voltage. There should be no change in the voltage gain at 106.02dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. It is important to keep in mind that the power supply voltage of this electric component is below 22V, which is suitable. Keeping the linear amplifier's supply voltage above 10V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 22V volts.

LM747J/883 Features

14 Pins
supply voltage of 15V
106.02dB voltage gain

LM747J/883 Applications

There are a lot of Texas Instruments
LM747J/883 Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.