TI LM611CM

Manufacturer No:

LM611CM

Manufacturer:

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

25mA per Channel 25nA 90 dB Instrumentational OP Amps 0.04μA 4V~32V ±2V~16V LM611 14 Pins 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LM611CM information

TI LM611CM technical specifications, attributes, parameters and parts with similar specifications to TI LM611CM.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Number of Pins
14

Operating Temperature
0°C~70°C

Packaging
Tube

Series
Super-Block™

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Tin/Lead (Sn/Pb)

Subcategory
Operational Amplifier

Packing Method
RAIL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
235

Number of Functions
1

Supply Voltage
5V

Base Part Number
LM611

Pin Count
14

Number of Circuits
1

Operating Supply Current
210μA

Nominal Supply Current
300μA

Output Current
25mA

Slew Rate
0.7V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
90 dB

Current - Input Bias
25nA

Voltage - Supply, Single/Dual (±)
4V~32V ±2V~16V

Output Current per Channel
25mA

Input Offset Voltage (Vos)
1.5mV

Bandwidth
800 kHz

Unity Gain BW-Nom
500 kHz

Voltage Gain
113.98dB

Average Bias Current-Max (IIB)
0.04μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
36V

Bias Current-Max (IIB) @25C
0.035μA

Length
8.65mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for TI LM611CM.

LM611CM Overview

In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 210μA and 10 . Maintain 113.98dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. As a result of this, the buffer amplifier is packed in RAIL. Super-Block™ is the number that corresponds to the series of the buffer op amp.

LM611CM Features

14 Pins
supply voltage of 5V
113.98dB voltage gain

LM611CM Applications

There are a lot of Texas Instruments
LM611CM Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.