TI LM4250CM/NOPB

Manufacturer No:

LM4250CM/NOPB

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

1 Channels 75nA 70 dB Instrumentational OP Amps 18V ±1V~18V LM4250 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LM4250CM/NOPB information

TI LM4250CM/NOPB technical specifications, attributes, parameters and parts with similar specifications to TI LM4250CM/NOPB.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tube

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Subcategory
Operational Amplifier

Packing Method
RAIL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
1.5V

Base Part Number
LM4250

Pin Count
8

Operating Supply Voltage
18V

Number of Channels
1

Nominal Supply Current
8μA

Power Dissipation
350mW

Output Current
12mA

Slew Rate
0.2 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
70 dB

Current - Input Bias
75nA

Voltage - Supply, Single/Dual (±)
±1V~18V

Input Offset Voltage (Vos)
6mV

Bandwidth
250 kHz

Neg Supply Voltage-Nom (Vsup)
-1.5V

Unity Gain BW-Nom
250 kHz

Low-Offset
NO

Frequency Compensation
YES

Micropower
YES

Bias Current-Max (IIB) @25C
0.075μA

Programmable Power
YES

Voltage Gain-Min
25000

Height
1.5mm

Length
5mm

Width
4mm

REACH SVHC
No SVHC

Download datasheets and manufacturer documentation for TI LM4250CM/NOPB.

PCN Design/Specification:

texasinstruments-lmc6953cmxnopb-pcndesignspecification-4899.pdf

Datasheets:

texasinstruments-lm4250cmnopb-datasheets-3027.pdf

LM4250CM/NOPB Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 1.5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 6mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 100μA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the RAIL-axis is adopted. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 25000.

LM4250CM/NOPB Features

8 Pins
supply voltage of 1.5V

LM4250CM/NOPB Applications

There are a lot of Texas Instruments
LM4250CM/NOPB Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.