TI LM324KDRG4

Manufacturer No:

LM324KDRG4

Manufacturer:

Package:

SOIC

Description:

4 Channels 60mA per Channel 20nA 65 dB Instrumentational OP Amps 0.5μA 16V 14 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LM324KDRG4 information

TI LM324KDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI LM324KDRG4.

Type
Parameter

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
14

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
1.27mm

Pin Count
14

Operating Supply Voltage
16V

Temperature Grade
COMMERCIAL

Max Supply Voltage
32V

Min Supply Voltage
3V

Operating Supply Current
1.4mA

Nominal Supply Current
3mA

Current - Output
30mA

Slew Rate
0.5 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
65 dB

Current - Input Bias
20nA

Output Current per Channel
60mA

Input Offset Voltage (Vos)
3mV

Bandwidth
1.2MHz

Gain Bandwidth Product
1.2MHz

Unity Gain BW-Nom
1200 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.5μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
16V

Micropower
YES

Min Dual Supply Voltage
1.5V

Bias Current-Max (IIB) @25C
0.25μA

Download datasheets and manufacturer documentation for TI LM324KDRG4.

LM324KDRG4 Overview

There is a SOIC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape & Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. It is possible to operate this buffer amplifier from a supply current of 1.4mA . 100dB should be the voltage gain. Op amp ic has 4 channels. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. At temperatures greater than 70°C, Instrumentation amplifier should not be used. The operating supply voltage of the buffer op amp is rated at 16V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The electrical part is capable of being powered by a voltage of under 32V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 3V. As a general rule, you should conduct this electronic component under dual supply voltages of 16V volts.

LM324KDRG4 Features

14 Pins
supply voltage of 5V
100dB voltage gain

LM324KDRG4 Applications

There are a lot of Texas Instruments
LM324KDRG4 Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.