TI LM2747MTC/NOPB

LM2747MTC/NOPB Overview

Capsuled in the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 3V~6V. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 50kHz~1MHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. 14 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 3.3V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LM2747". Switching converter has a total of 14 pins. According to the test statistics, DC regulator outputs 13.5V voltage. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 86 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe max frequency of the pmic can reach 1MHz. DC to DC voltage regulator has a value of OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.6V to better satisfy the need. It is suggested that users apply 17V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The dc switching utilizes 1.7mA when it is in a dormant state. Because the dc switcher's maximum input voltage is 6V users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 3V. The voltage controller's lowest voltage output is not less than 600mV. This controller switches with 1 phases.

LM2747MTC/NOPB Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %
OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.6V

LM2747MTC/NOPB Applications

There are a lot of Texas Instruments
LM2747MTC/NOPB DC to DC converter applications.

• CNC system
• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments