TI LM2727MTC

LM2727MTC Overview

In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~5.5V volts and has 4.5V~5.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 50kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 14 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "LM2727", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 600mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20A. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 2MHz is set for the switching controller. In dormant mode, 1.5mA is used. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. Voltage 4.5V must be supplied. Depending on the datasheet, the switching converter can output 5V volts at its peak. During switching, this controller has a phase of 1.

LM2727MTC Features

Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 2MHz

LM2727MTC Applications

There are a lot of Texas Instruments
LM2727MTC DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment