TI LF411ACN

Manufacturer No:

LF411ACN

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

1 Channels 50pA 80 dB Instrumentational OP Amps 0.0002?A 22V 10V~44V ±5V~22V LF411 8 Pins 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LF411ACN information

TI LF411ACN technical specifications, attributes, parameters and parts with similar specifications to TI LF411ACN.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tube

Series
BI-FET II?

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Tin/Lead (Sn/Pb)

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
15V

Terminal Pitch
2.54mm

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
LF411

Qualification Status
Not Qualified

Operating Supply Voltage
22V

Number of Channels
1

Operating Supply Current
1.8mA

Nominal Supply Current
1.8mA

Power Dissipation
670mW

Output Current
25mA

Slew Rate
15V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
J-FET

Common Mode Rejection Ratio
80 dB

Current - Input Bias
50pA

Voltage - Supply, Single/Dual (±)
10V~44V ±5V~22V

Input Offset Voltage (Vos)
500?V

Bandwidth
3MHz

Gain Bandwidth Product
4MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
4000 kHz

Voltage Gain
106.02dB

Average Bias Current-Max (IIB)
0.0002?A

Power Supply Rejection Ratio (PSRR)
80dB

Low-Offset
YES

Frequency Compensation
YES

Download datasheets and manufacturer documentation for TI LF411ACN.

LF411ACN Overview

In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 500?V. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.8mA and 10 . 106.02dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 22V. BI-FET II? is the number that corresponds to the series of the buffer op amp.

LF411ACN Features

8 Pins
supply voltage of 15V
106.02dB voltage gain

LF411ACN Applications

There are a lot of Texas Instruments
LF411ACN Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.