Microchip LAN9218-MT
Microchip LAN9218-MT

Microchip LAN9218-MT

Manufacturer No:

LAN9218-MT

Manufacturer:

Microchip

Package:

100-LQFP

Description:

The LAN9218(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications and has been specifically architected to provide the highest performance.

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LAN9218-MT information

Microchip LAN9218-MT technical specifications, attributes, parameters and parts with similar specifications to Microchip LAN9218-MT.

  • Type
  • Parameter
  • Checksum Offload
  • No
  • DownstreamPorts
  • 1
  • ESD Rating
  • 0
  • Port Speed
  • 10/100Mbps
  • Fiber Support
  • No
  • I/O Pins
  • 0
  • Interrupt Pin
  • 1
  • LEDS
  • 3
  • LinkMDCableDiag
  • No
  • Mixed Endian
  • No
  • NoofEtherPorts
  • 0
  • Number of VLANs
  • 0
  • OpVoltage
  • 0
  • Supply Voltages
  • 0
  • TX/RX Ram Buffer
  • 16K
  • Temperature Range Max
  • 85
  • Temperature Range Min
  • -40
  • Digital I/O Voltage
  • 3.3

Download datasheets and manufacturer documentation for Microchip LAN9218-MT.

Application Notes:

Brochures:

Data Sheets:

Supporting Collateral:

The LAN9218(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9218(i) has been specifically architected to provide the highest performance possible for any given architecture. The LAN9218(i) is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant, and supports HP Auto-MDIX.

The LAN9218(i) includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit and 32-bit microprocessors and microcontrollers. The LAN9218(i) includes large transmit and receive data FIFOs with a high-speed host bus interface to accommodate high bandwidth, high latency applications. In addition, the LAN9218(i) memory buffer architecture allows the most efficient use of memory resources by optimizing packet granularity.

The 93AA46AE48 EEPROM device from Microchip comes with a factory programmed, globally unique EUI-48™ MAC Address. This Ethernet controller will automatically detect and load the EUI-48™ node address from the 93AA46AE48 EEPROM at start-up or reset. 


Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.



  • Optimized for the highest performance applications
  • Efficient architecture with low CPU overhead
  • Easily interfaces to most 32-bit and 16-bit embedded CPU’s
  • Integrated PHY with HP Auto-MDIX Support
  • Supports audio & video streaming over Ethernet: multiple high-definition (HD) MPEG2 streams
  • Highest performing non-PCI Ethernet controller
  • 32-bit interface with fast bus cycle times
  • Burst-mode read support
  • Internal buffer memory can store over 200 packets
  • Automatic PAUSE and back-pressure flow control
  • Supports Slave-DMA
  • Interrupt Pin with Programmable Hold-off timer
  • Reduces system cost and increases design flexibility
  • SRAM-like interface easily interfaces to most Embedded CPU's or SoC's
  • Numerous power management modes
  • Wake on LAN*
  • Magic packet wakeup*
  • Wakeup indicator event signal
  • Link Status Change
  • Fully compliant with IEEE 802.3/802.3u standards
  • Integrated Ethernet MAC and PHY
  • 10BASE-T and 100BASE-TX support
  • Full- and Half-duplex support
  • Full-duplex flow control
  • Backpressure for half-duplex flow control
  • Preamble generation and removal
  • Automatic 32-bit CRC generation and checking
  • Automatic payload padding and pad removal
  • Loop-back modes
  • One 48-bit perfect address
  • 64 hash-filtered multicast addresses
  • Pass all multicast
  • Promiscuous mode
  • Inverse filtering
  • Pass all incoming with status report
  • Disable reception of broadcast packets
  • Supports HP Auto-MDIX
  • Auto-negotiation
  • Supports energy-detect power down
  • Simple, SRAM-like interface
  • 32 or 16-bit data bus
  • 16Kbyte FIFO with flexible TX/RX allocation
  • One configurable host interrupt
  • Low-profile 100-pin TQFP, RoHS Compliant package
  • General Purpose Timer
  • Optional EEPROM interface
  • Support for 3 status LEDs multiplexed with Programmable GPIO signals
  • Single 3.3V Power Supply with 5V tolerant I/O
  • Commercial and Industrial (LAN9218i) Temperature Support
      • Common Applications:
    • Video distribution systems, multi-room PVR
    • Cable, satellite, and IP set-top boxes
    • Digital video recorders and DVD recorder/players
    • Digital TV
    • Digital media clients/servers and home gateways
    • Video-over IP Solutions, IP PBX & video phones
    • Wireless routers & access points
    • High-end audio distribution systems

    User Guide

    PURCHASE

    Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

    MEANS OF PAYMENT

    For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

    RFQ (REQUEST FOR QUOTATIONS)

    Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
    Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

    IMPORTANT NOTICE

    Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

    Step1：Prepare product

    Step1：Prepare product

    Step2：Desiccant Protection

    Step2：Desiccant Protection

    Step3：Vacuum Packaging

    Step3：Vacuum Packaging

    Step4：Individual Package

    Step4：Individual Package

    Step5：Anti-collision Filling

    Step5：Anti-collision Filling

    Step6：Packaging Box

    Step6：Packaging Box

    SHIPPING COST

    1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
    2. Some specific products need to reach the minimum order quantity.
    3. It may cost additional remote fees for delivery if you are in a remote area.

    SHIPPING METHOD

    Currently, our products are shipped through DHL, FedEx, SF, and UPS.

    DELIVERY TIME

    1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
    2. For in-stock parts, orders normally could be shipped out within 1-2days.

    LAN9218-MT Relevant information

    The following parts are popular search parts in Integrated Circuits (ICs).