Microchip LAN9215I-MT

Manufacturer No:

LAN9215I-MT

Manufacturer:

Microchip

Package:

100-LQFP

Description:

LAN9215(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required.

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LAN9215I-MT information

Microchip LAN9215I-MT technical specifications, attributes, parameters and parts with similar specifications to Microchip LAN9215I-MT.

Type
Parameter

Checksum Offload
No

DownstreamPorts
1

ESD Rating
0

Port Speed
10/100Mbps

Fiber Support
No

Interrupt Pin
1

LEDS
3

LinkMDCableDiag
No

Mixed Endian
No

NoofEtherPorts
0

Number of VLANs
0

OpVoltage
0

Supply Voltages
0

TX/RX Ram Buffer
16K

Temperature Range Max
85

Temperature Range Min
-40

Digital I/O Voltage
3.3

Download datasheets and manufacturer documentation for Microchip LAN9215I-MT.

The LAN9215(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9215(i) has been architected to provide the best price-performance ratio for any 16-bit application with medium performance requirements. The LAN9215(i) is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant, and supports HP Auto-MDIX.

The LAN9215(i) includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit microprocessors and microcontrollers as well as 32-bit microprocessors with a 16-bit external bus. The LAN9215(i) includes large transmit and receive data FIFOs to accommodate high latency applications. In addition, the LAN9215(i) memory buffer architecture allows the most efficient use of memory resources by optimizing packet granularity.

The 93AA46AE48 EEPROM device from Microchip comes with a factory programmed, globally unique EUI-48™ MAC Address. This Ethernet controller will automatically detect and load the EUI-48™ node address from the 93AA46AE48 EEPROM at start-up or reset.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Optimized for medium performance applications

Efficient architecture with low CPU overhead

Easily interfaces to most 16-bit embedded CPU's

Integrated PHY with HP Auto-MDIX Support

Supports audio & video streaming over Ethernet: multiple standard-definition (SD) MPEG2 streams

Compatible with other members of LAN9218 family

16-bit interface

Burst-mode read support

External MII interface

Internal buffer memory can store over 200 packets

Automatic PAUSE and back-pressure flow control

Supports Slave-DMA

Interrupt Pin with Programmable Hold-off timer

Reduces system cost and increases design flexibility

SRAM-like interface easily interfaces to most Embedded CPU's or SoC's

Numerous power management modes

Wake on LAN*

Magic packet wakeup*

Wakeup indicator event signal

Link Status Change

Fully compliant with IEEE 802.3/802.3u standards

Integrated Ethernet MAC and PHY

10BASE-T and 100BASE-TX support

Full- and Half-duplex support

Full-duplex flow control

Backpressure for half-duplex flow control

Preamble generation and removal

Automatic 32-bit CRC generation and checking

Automatic payload padding and pad removal

Loop-back modes

One 48-bit perfect address

64 hash-filtered multicast addresses

Pass all multicast

Promiscuous mode

Inverse filtering

Pass all incoming with status report

Disable reception of broadcast packets

Supports HP Auto-MDIX

Auto-negotiation

Supports energy-detect power down

Simple, SRAM-like interface

16-bit data bus

16Kbyte FIFO with flexible TX/RX allocation

One configurable host interrupt

Low-profile 100-pin TQFP, or 100-ball LFBGA (LAN9215) RoHS Compliant package

Integrated 1.8V regulator

General Purpose Timer

Optional EEPROM interface

Support for 3 status LEDs multiplexed with Programmable GPIO signals

Single 3.3V Power Supply with 5V tolerant I/O

Commercial and Industrial (LAN9215i) Temperature Support

Basic cable, satellite, and IP set-top boxes
Digital video recorders
Video-over IP solutions, IP PBX & video phones
Wireless routers & access points
Audio distribution systems
Printers, kiosks, security systems
General embedded applications

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.