ST L6910

Manufacturer No:

L6910

Manufacturer:

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

16 Terminals 5V~12V 16-Pin L6910 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 200kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

L6910 information

ST L6910 technical specifications, attributes, parameters and parts with similar specifications to ST L6910.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
16

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn) - annealed

Subcategory
Switching Regulator or Controllers

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Frequency
1MHz

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
L6910

Function
Step-Down

Number of Outputs
1

Output Voltage
900mV

Output Type
Transistor Driver

Operating Supply Voltage
12V

Analog IC - Other Type
SWITCHING CONTROLLER

Operating Supply Current
9mA

Output Configuration
Positive

Output Current
1.3A

Voltage - Supply (Vcc/Vdd)
5V~12V

Max Supply Current
9mA

Control Features
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start

Max Output Voltage
913mV

Topology
Buck

Min Input Voltage
5V

Control Mode
VOLTAGE-MODE

Frequency - Switching
200kHz

Max Input Voltage
12V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
Yes

Min Output Voltage
886mV

Switcher Configuration
PUSH-PULL

Max Duty Cycle
100 %

Isolation
Non-Isolated

Clock Sync
No

Height
1.65mm

Length
10mm

Width
4mm

Download datasheets and manufacturer documentation for ST L6910.

Datasheets:

stmicroelectronics-l6910-datasheets-7769.pdf

L6910 Overview

With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 5V~12V. Worked in an dc switcher with a -40°C~150°C TJ rating. Switching can be done at 200kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control, Phase Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Search for "L6910" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 900mV. You should note that the dc dc regulator's usual output current is 1.3A. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 1MHz is used by the switching controller. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. The dc switcher's maximum input voltage is 12V, so users must limit the voltage accordingly. A voltage of 5V is required for the supply. Datasheets indicate that the switching converter can output 913mV volts at its maximum. The supply current is 9mA. There is 886mV voltage output lower than 886mV on the voltage controller. Having a current greater than 9mA may result in improper operation and possibly damage to the component.

L6910 Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

L6910 Applications

There are a lot of STMicroelectronics
L6910 DC to DC converter applications.

Servo drive system
Digital display device
Linear guide
Ball screw pair
Computer application technology
Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.