ST L6727

L6727 Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.1V~13.2V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. The switching controller is capable of switching at the 300kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Phase Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "L6727" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 800mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 1.5A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 350kHz. A circuit should contain 13.2V in order to ensure the voltage regulator dc to dc runs safely and reliably. In order to limit the voltage of a dc switcher whose maximum input voltage is 13.2V, it must be limited by the user. Voltage 4.1V is necessary for the supply. At its lowest voltage, the voltage controller does not produce less than 800mV. There is a possibility that a current higher than 6mA will cause improper operation of the component and possibly damage switching voltage regulators.

L6727 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %

L6727 Applications

There are a lot of STMicroelectronics
L6727 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery