ST L6370D013TR

Manufacturer No:

L6370D013TR

Manufacturer:

Package:

20-SOIC (0.433, 11.00mm Width) Exposed Pad

Description:

N-Channel PMIC L6370 20 Pin 24V 20-SOIC (0.433, 11.00mm Width) Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

L6370D013TR information

ST L6370D013TR technical specifications, attributes, parameters and parts with similar specifications to ST L6370D013TR.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
14 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
20-SOIC (0.433, 11.00mm Width) Exposed Pad

Number of Pins
20

Operating Temperature
-25°C~85°C TJ

Packaging
Tape & Reel (TR)

JESD-609 Code
e3

Feature
Status Flag

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
20

ECCN Code
EAR99

Resistance
100mOhm

Terminal Finish
Tin (Sn)

Subcategory
Peripheral Drivers

Technology
BCD

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
245

Number of Functions
1

Supply Voltage
24V

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
20

Number of Outputs
1

Output Type
N-Channel

Max Output Current
3.2A

Operating Supply Voltage
35V

Interface
On/Off

Nominal Supply Current
20mA

Output Configuration
High Side

Output Current
2.5A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
20mA

Input Type
Differential

Turn On Delay Time
1.28 ?s

Switch Type
General Purpose

Min Input Voltage
9.5V

Max Input Voltage
35V

Output Current per Channel
2.5A

Nominal Input Voltage
24V

Ratio - Input:Output
1:1

Voltage - Load
9.5V~35V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO

Output Peak Current Limit-Nom
3.2A

Download datasheets and manufacturer documentation for ST L6370D013TR.

Datasheets:

stmicroelectronics-l6370d-datasheets-7134.pdf

L6370D013TR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -25°C~85°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the L6370 family.A total of 20 terminations can be found in it.During operation, the 20 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 3.2A.It is possible to obtain high efficiency with a supply voltage of 24V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 20 pins.In this case, there is 100mOhm resistance in the LED driving board.This results in a 2.5A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 35V.The maximum input voltage of the LED driver is 35V volts.There is a minimum input voltage of 9.5V volts for this LED driver.This system has a maximum current requirement of 20mA.

L6370D013TR Features

Supplied from 24V
Resistance of 100mOhm

L6370D013TR Applications

There are a lot of STMicroelectronics
L6370D013TR Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.