Microchip KSZ9131RNXC-TR

Manufacturer No:

KSZ9131RNXC-TR

Manufacturer:

Microchip

Package:

48-VFQFN Exposed Pad

Description:

The KSZ9131 is an automotive integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver, with LinkMD cable diagnostics.

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

KSZ9131RNXC-TR information

Microchip KSZ9131RNXC-TR technical specifications, attributes, parameters and parts with similar specifications to Microchip KSZ9131RNXC-TR.

Type
Parameter

Automotive
Yes

DownstreamPorts
1

Energy Efficient Ethernet
Yes

EtherCAT
No

Port Speed
10/100/1000Mbps

Fiber Support
No

HP Auto MDIX
Yes

On-Chip Termination
Yes

InterfaceUpStream
MII/RGMII/GMII

Internal Regulator
Yes

LinkMDCableDiag
Yes

MACsec
No

Supply Voltages
3.3

SyncE
No

Temperature Range Max
105

Temperature Range Min
-40

Digital I/O Voltage
1.8/2.5/3.3

WakeonLAN
Yes

IEEE 1588 v2
No

Download datasheets and manufacturer documentation for Microchip KSZ9131RNXC-TR.

The KSZ9131 is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable.

The KSZ9131RNX provides Reduced Gigabit Media Independent Interface RGMII and the KSZ9131MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps.

The KSZ9131 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

The KSZ9131 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9131 I/Os and the board. The LinkMD^® TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.

The standard KSZ9131RNX is available in the 48-pin, RoHS compliant QFN package, and the AEC-Q100 automotive qualified parts, KSZ9131RNXU and KSZ9131RNXV, are available in the 48-pin lead-RoHS compliant VQFN (wettable) package. The KSZ9131MNX is available in a 64-pin, RoHS Compliant QFN package.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver

GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os

Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)

On-chip termination resistors for the differential pairs

On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core

Jumbo frame support up to 16KB

125MHz Reference Clock Output

Energy-detect power-down mode for reduced power consumption when the cable is not attached

Wake-on-LAN (WOL) support with robust custom-packet detection

Programmable LED outputs for link, activity, and speed

Baseline wander correction

LinkMD® TDR-based cable diagnostic to identify faulty copper cabling

Parametric NAND tree support to detect faults between chip I/Os and board

Loopback modes for diagnostics

Automatic MDI/MDI-X crossover to detect and correct pair swap at all speeds of operation

MDC/MDIO management interface for PHY register configuration

Automatic detection and correction of pair swaps, pair skew, and pair polarity

Interrupt pin option

Power-down and power-saving modes

Available in 48-pin QFN (7mm x 7mm) and 64-pin QFN (8mm x 8mm) packages

Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator)
VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V
Transceiver (AVDDH): 3.3V or 2.5V (commercial temp)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.