Microchip KSZ8895FQXIA

Manufacturer No:

KSZ8895FQXIA

Manufacturer:

Microchip

Package:

128-BFQFP

Description:

The Microchip KSZ8895 is an automotive qualified, highly integrated, Layer 2 managed, five-port switch with numerous features designed to reduce system cost.

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

KSZ8895FQXIA information

Microchip KSZ8895FQXIA technical specifications, attributes, parameters and parts with similar specifications to Microchip KSZ8895FQXIA.

Type
Parameter

Copper Support
10/100 (4)

DownstreamPorts
5

Port Speed
10/100Mbps

Fiber Support
100FX (2)

Flow Control
Yes

IEEE 1588
No

IPV6
Yes

InterfaceUpStream
MII/RMII

InternalLDO
Yes

LinkMDCableDiag
Yes

Managed
Yes

OpVoltage
3.3

Rapid Spanning Tree Protocol
Yes

Rate Limiting
Yes

Smart Powe Adjust
Yes

Static MAC Address
Yes

Supply Voltages
3.3

Temperature Range Max
85

Temperature Range Min
-40

Digital I/O Voltage
1.8/2.5/3.3

WakeonLAN
No

Download datasheets and manufacturer documentation for Microchip KSZ8895FQXIA.

The KSZ8895MQX/RQX/FQX/ML is a highly-integrated, Layer 2 managed, five-port switch with numerous features designed to reduce system cost. The KSZ8895 is Automotive qualified (AEC-Q100).

The KSZ8895 family was designed to be used in for cost sensitive 10/100Mbps five-port switch systems with low power requirements. Combining on-chip termination and internal LDO regulator help minimize system cost. The KSZ8895 family supports high-performance memory bandwidth and shared memory-based switch fabric with non-blocking configuration.

The KSZ8895 family also includes an extensive feature set, including: power management, programmable rate limit and priority ratio, tag/port-based VLAN, packets filtering, four queue QoS prioritization, management interfaces, and MIB counters.

The KSZ8895 family provides multiple CPU data interfaces to effectively address both current and emerging fast Ethernet applications when port 5 is configured to separate MAC5 with SW5-MII/RMII and PHY5 with P5-MII/RMII interfaces.

The KSZ8895 family offers three configurations, providing the flexibility to meet different requirements:

KSZ8895MQX/ML has 5 10/100Base-T/TX transceivers, 1 SW5-MII and 1 P5-MII interface
KSZ8895RQX has 5 10/100Base-T/TX transceivers, 1 SW5-RMII and 1 P5-RMII interface
KSZ8895FQX has 4 10/100Base-T/TX transceivers on Ports 1, 2, 3 and 5 (port 3 can be set to the fiber mode). 1 100Base-FX transceivers on Port 4. 1 SW5-MII and 1 P5-MII interface

All registers of MACs and PHYs units can be managed by the SPI or the SMI interface. MIIM registers can be accessed through the MDC/MDIO interface.

EEPROM can set all control registers for the unmanaged mode. KSZ8895MQX/RQX/FQX are 128-pin PQFP package. KSZ8895ML is 128-pin LQFP package.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

**Please note: KSZ8895 part numbers ending/containing "A" are not recommended for new designs as there is a newer version. However, both versions will continue to be supported.**

KSZ8895RQXIA >> KSZ8895RQXI
KSZ8895FQXCA >> KSZ8895FQXC
KSZ8895MQXCA >>KSZ8895MQXC
KSZ8895FQXIA >> KSZ8895FQXI
KSZ8895RQXCA >>KSZ8895RQXC
KSZ8895MQXIA >>KSZ8895MQXI

IEEE 802.1q VLAN support for up to 128 active VLAN groups (full-range 4096 of VLAN IDs)

Static MAC table supports up to 32 entries

VLAN ID tag/untag options, per port basis

Comprehensive Configuration Register Access

Serial management interface (MDC/MDIO) to all PHYs registers and SMI interface (MDC/MDIO) to all registers

High-speed SPI (up to 25MHz) and I2C master Interface to all internal registers

I/0 pins strapping and EEPROM to program selective registers in unmanaged switch mode

QoS/CoS Packet Prioritization Support

Per port, 802.1p and DiffServ-based

1/2/4-queue QoS prioritization selection

Programmable weighted fair queuing for ratio control

Integrated 5-Port 10/100 Ethernet Switch

New generation switch with five MACs and five PHYs that are fully compliant with the IEEE 802.3u standard

PHYs designed with patented enhanced mixed-signal technology

Non-blocking switch fabric assures fast packet delivery by utilizing a 1K MAC address lookup table and a store-and-forward architecture

Switch Monitoring Features

Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII

MIB counters for fully-compliant statistics gathering 34 MIB counters per port

Loop-back support for MAC, PHY, and remote diagnostic of failure

Low-Power Dissipation

Full-chip software power-down and per port software power down

Energy-detect mode support <100mW full-chip power consumption when all ports have no activity

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.