ONSEMI KA7500CDTF

Manufacturer No:

KA7500CDTF

Manufacturer:

ONSEMI

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

16 Terminals 7V~40V 16-Pin KA7500 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 1kHz~200kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

KA7500CDTF information

ONSEMI KA7500CDTF technical specifications, attributes, parameters and parts with similar specifications to ONSEMI KA7500CDTF.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 2 days ago)

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Weight
155mg

Operating Temperature
-25°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2009

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Switching Regulator or Controllers

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Frequency
300kHz

Base Part Number
KA7500

Function
Step-Down

Output Voltage
5V

Output Type
Transistor Driver

Max Output Current
250mA

Input Voltage-Nom
15V

Analog IC - Other Type
SWITCHING CONTROLLER

Nominal Supply Current
10mA

Output Configuration
Positive

Output Current
250mA

Voltage - Supply (Vcc/Vdd)
7V~40V

Max Supply Current
10mA

Control Features
Dead Time Control

Topology
Buck

Min Input Voltage
7V

Control Mode
VOLTAGE-MODE

Frequency - Switching
1kHz~200kHz

Max Input Voltage
40V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
Yes

Switcher Configuration
PUSH-PULL

Max Duty Cycle
45 %

Clock Sync
No

Height
1.65mm

Length
10.1mm

Download datasheets and manufacturer documentation for ONSEMI KA7500CDTF.

KA7500CDTF Overview

It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 7V~40V voltage are supplied and operated. A -25°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 1kHz~200kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. KA7500 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5V. You should note down the dc dc regulator's usual output current of 250mA when you start a project. A duty cycle set at 45 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 300kHz. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. There must be a 7V supply voltage. DC switcher will not be able to provide an output current above 250mA volts. In the presence of a current greater than 10mA, the component may fail to operate properly and may be damaged. Switching voltage regulators' nominal current supply is 10mA.

KA7500CDTF Features

Transistor Driver Outputs
Switching Frequency: 1kHz~200kHz
Dead Time Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

KA7500CDTF Applications

There are a lot of ON Semiconductor
KA7500CDTF DC to DC converter applications.

Computer application technology
Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.