ISL6742AAZA-T-Renesas-Price, Stock & Datasheet

ISL6742AAZA-T Overview

In the SSOP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 4. There is a Cut Tape (CT) solid enclosure around the pmic. It can switch at 2MHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 9V. The dc to dc regulator can only accept 20V input voltage. Voltage regulator dc to dc is designed to operate at 99 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Hence, CAN BE OPERATED IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. You should keep dc regulator at -40°C degrees or higher. There should be 105°C temperature above 105°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. In dormant mode, 5mA is used. Designing voltage regulators switchings with 16 pins. Switching can take place at a maximum frequency of 2MHz. This is an ideal solution for switching controllers with 100mA inputs.