Renesas ISL55002IBZ-T7

Manufacturer No:

ISL55002IBZ-T7

Manufacturer:

Renesas

Package:

SOIC

Description:

2 Channels 140mA per Channel 600nA 90 dB Instrumentational OP Amps 28V 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ISL55002IBZ-T7 information

Renesas ISL55002IBZ-T7 technical specifications, attributes, parameters and parts with similar specifications to Renesas ISL55002IBZ-T7.

Type
Parameter

Factory Lead Time
5 Weeks

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
8

Weight
540.001716mg

Packaging
Cut Tape

Published
2005

JESD-609 Code
e3

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn) - annealed

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Time@Peak Reflow Temperature-Max (s)
40

Pin Count
8

Operating Supply Voltage
28V

Temperature Grade
INDUSTRIAL

Number of Channels
2

Min Supply Voltage
4.5V

Operating Supply Current
8.5mA

Slew Rate
300 V/μs

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
90 dB

Current - Input Bias
600nA

Output Current per Channel
140mA

Supply Type
Dual, Single

Input Offset Voltage (Vos)
1.2mV

Bandwidth
200MHz

Gain Bandwidth Product
70MHz

Voltage Gain
86.44dB

Power Supply Rejection Ratio (PSRR)
100dB

Max Dual Supply Voltage
15V

-3db Bandwidth
200MHz

Min Dual Supply Voltage
2.25V

Dual Supply Voltage
12V

Input Voltage Noise Density
12nV/sqrt Hz

Input Noise Current Density
1.5pA/sqrt Hz

Height
1.5mm

Length
5mm

Width
4mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for Renesas ISL55002IBZ-T7.

ISL55002IBZ-T7 Overview

A SOIC case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1.2mV. An 8.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. The operating supply voltage of the buffer op amp is rated at 28V. I would like to point out that this electrical component is capable of working from a voltage below 30V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 4.5V at all times. The dual supply voltage of 15V should be used for the conduct of this electronic component.

ISL55002IBZ-T7 Features

8 Pins
86.44dB voltage gain

ISL55002IBZ-T7 Applications

There are a lot of Intersil (Renesas Electronics America)
ISL55002IBZ-T7 Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.