Renesas ISL28476FAZ

Manufacturer No:

ISL28476FAZ

Manufacturer:

Renesas

Package:

SSOP

Description:

4 Channels 31mA per Channel 500pA 115 dB Instrumentational OP Amps 0.0025μA 3V 16 Pins SSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ISL28476FAZ information

Renesas ISL28476FAZ technical specifications, attributes, parameters and parts with similar specifications to Renesas ISL28476FAZ.

Type
Parameter

Mount
Surface Mount

Package / Case
SSOP

Number of Pins
16

Weight
288.002805mg

Published
2009

JESD-609 Code
e3

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
16

ECCN Code
EAR99

Terminal Finish
MATTE TIN

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
BICMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
0.635mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
40

Pin Count
16

Operating Supply Voltage
3V

Temperature Grade
AUTOMOTIVE

Number of Channels
4

Max Supply Voltage
5V

Min Supply Voltage
2.4V

Operating Supply Current
240μA

Supply Current-Max
0.35mA

Slew Rate
0.17 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
115 dB

Current - Input Bias
500pA

Output Current per Channel
31mA

Supply Type
Single

Input Offset Voltage (Vos)
20μV

Gain Bandwidth Product
400 kHz

Unity Gain BW-Nom
400 kHz

Voltage Gain
114.81dB

Average Bias Current-Max (IIB)
0.0025μA

Power Supply Rejection Ratio (PSRR)
90dB

Low-Offset
YES

Frequency Compensation
YES

Micropower
YES

Download datasheets and manufacturer documentation for Renesas ISL28476FAZ.

ISL28476FAZ Overview

A SSOP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. It is estimated that there will be 16 terminations in the next few months. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 16 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 20μV. An 240μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 4 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125°C. The operating supply voltage of the buffer op amp is rated at 3V. I would like to point out that this electrical component is capable of working from a voltage below 5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.4V at all times.

ISL28476FAZ Features

16 Pins
supply voltage of 5V
114.81dB voltage gain

ISL28476FAZ Applications

There are a lot of Intersil (Renesas Electronics America)
ISL28476FAZ Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.