ISSI IS25LD020-JDLE

Manufacturer No:

IS25LD020-JDLE

Manufacturer:

ISSI

Package:

8-TSSOP (0.173, 4.40mm Width)

Description:

Surface Mount Memory IC 2 Mb kb 4.4mm mm 15mA mA 8b b

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

IS25LD020-JDLE information

ISSI IS25LD020-JDLE technical specifications, attributes, parameters and parts with similar specifications to ISSI IS25LD020-JDLE.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP (0.173, 4.40mm Width)

Number of Pins
8

Weight
157.991892mg

Operating Temperature
-40°C~105°C TA

Packaging
Tube

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

Technology
CMOS

Voltage - Supply
2.3V~3.6V

Terminal Position
DUAL

Number of Functions
1

Terminal Pitch
0.65mm

Qualification Status
Not Qualified

Operating Supply Voltage
3.3V

Supply Voltage-Max (Vsup)
3.6V

Supply Voltage-Min (Vsup)
2.3V

Interface
SPI, Serial

Memory Size
2Mb 256K x 8

Nominal Supply Current
15mA

Memory Type
Non-Volatile

Max Supply Current
15mA

Access Time
8 ns

Memory Format
FLASH

Memory Interface
SPI

Data Bus Width
8b

Memory Width
8

Write Cycle Time - Word, Page
5ms

Address Bus Width
18b

Density
2 Mb

Standby Current-Max
0.00001A

Sync/Async
Synchronous

Word Size
8b

Programming Voltage
2.7V

Serial Bus Type
SPI

Endurance
100000 Write/Erase Cycles

Data Retention Time-Min
20

Write Protection
HARDWARE/SOFTWARE

Page Size
256B

Length
4.4mm

Height Seated (Max)
1.2mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ISSI IS25LD020-JDLE.

IS25LD020-JDLE Overview

A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. Embedded in the 8-TSSOP (0.173, 4.40mm Width) case, memory ics is a single file. On the chip, there is an 2Mb 256K x 8 memory, which is the size of the chip's memory. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~105°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.3V~3.6V volts. The recommended mounting type for memory ics is Surface Mount. A total of 8 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. A clock frequency rotation within 100MHz is used for the ic memory chip to rotate data. A 8-pin package containing this memory device is used to house this device. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 15mA for this memory component. Its SPI-type serial bus helps transfer data to the CPU efficiently. A programming voltage of 2.7V is required to change a nonvolatile memory array's state. It can be operated with a current of up to 15mA at a maximum.

IS25LD020-JDLE Features

Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:3.3V

IS25LD020-JDLE Applications

There are a lot of ISSI, Integrated Silicon Solution Inc
IS25LD020-JDLE Memory applications.

supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders
embedded logic
eDRAM
graphics card

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.