ISSI IS25CQ032-JBLE

Manufacturer No:

IS25CQ032-JBLE

Manufacturer:

ISSI

Package:

8-SOIC (0.209, 5.30mm Width)

Description:

3/3.3V V Surface Mount Memory IC 32 Mb kb 15mA mA 8b b

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

IS25CQ032-JBLE information

ISSI IS25CQ032-JBLE technical specifications, attributes, parameters and parts with similar specifications to ISSI IS25CQ032-JBLE.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.209, 5.30mm Width)

Number of Pins
8

Weight
540.001716mg

Operating Temperature
-40°C~105°C TA

Packaging
Tube

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

Technology
CMOS

Voltage - Supply
2.7V~3.6V

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
3V

Terminal Pitch
1.27mm

Supply Voltage-Max (Vsup)
3.6V

Power Supplies
3/3.3V

Supply Voltage-Min (Vsup)
2.7V

Interface
SPI, Serial

Memory Size
32Mb 4M x 8

Nominal Supply Current
15mA

Memory Type
Non-Volatile

Max Supply Current
15mA

Access Time
8 ns

Memory Format
FLASH

Memory Interface
SPI

Data Bus Width
8b

Organization
32MX1

Memory Width
1

Write Cycle Time - Word, Page
4ms

Address Bus Width
22b

Density
32 Mb

Standby Current-Max
0.00003A

Sync/Async
Synchronous

Word Size
8b

Programming Voltage
2.7V

Serial Bus Type
SPI

Endurance
100000 Write/Erase Cycles

Data Retention Time-Min
20

Write Protection
HARDWARE/SOFTWARE

Page Size
256B

Height Seated (Max)
2.16mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ISSI IS25CQ032-JBLE.

IS25CQ032-JBLE Overview

As far as its memory type goes, it falls into the Non-Volatile category. You can get memory ics in a Tube case. 8-SOIC (0.209, 5.30mm Width) case encloses it. There is 32Mb 4M x 8 of memory on the chip. The device uses a mainstream FLASH-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~105°C TA. There is a voltage range of 2.7V~3.6V for the supply voltage. It is recommended that the mounting type be Surface Mount. There are 8 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3V volt power supply in order to operate properly. It has a clock frequency of 104MHz. In this ic memory chip, there is an 8-pin package that encloses the device. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 15mA. As for the power supply, this memory chip only needs 3/3.3V . Integrated into this memory is a SPI-type serial bus that facilitates data transmission to the CPU. The programming voltage required for certain nonvolatile memory arrays is 2.7V. Maximum current is 15mA .

IS25CQ032-JBLE Features

Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins

IS25CQ032-JBLE Applications

There are a lot of ISSI, Integrated Silicon Solution Inc
IS25CQ032-JBLE Memory applications.

multimedia computers
networking
personal computers
servers
supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.