TI INA155E/250G4

Manufacturer No:

INA155E/250G4

Manufacturer:

Package:

VSSOP

Description:

1 Channels 50mA per Channel 10pA 92 dB Instrumentational OP Amps 8 Pins VSSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

INA155E/250G4 information

TI INA155E/250G4 technical specifications, attributes, parameters and parts with similar specifications to TI INA155E/250G4.

Type
Parameter

Package / Case
VSSOP

Surface Mount
YES

Number of Pins
8

Weight
25.996513mg

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
8

ECCN Code
EAR99

Resistance
10 T?

Terminal Finish
NICKEL PALLADIUM GOLD

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Instrumentation Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Pin Count
8

Number of Elements
2

Power Supplies
3/5V

Number of Channels
1

Max Supply Voltage
5.5V

Min Supply Voltage
2.7V

Operating Supply Current
1.7mA

Nominal Supply Current
2.1mA

Quiescent Current
1.7mA

Slew Rate
6.5 V/?s

Amplifier Type
INSTRUMENTATION AMPLIFIER

Common Mode Rejection Ratio
92 dB

Current - Input Bias
10pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
1mV

Bandwidth
550 kHz

Voltage Gain
33.98dB

Power Supply Rejection Ratio (PSRR)
86.02dB

-3db Bandwidth
550 kHz

Voltage Gain-Nom
10

Height
970?m

Length
3mm

Width
3mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI INA155E/250G4.

INA155E/250G4 Overview

It is packaged in an VSSOP-case that protects the operational amplifiers from damage. An op amp of this type is a INSTRUMENTATION AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Instrumentation Amplifier op amp ic can be identified by the fact that this is a type of Instrumentation Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1mV for input offset voltage. A supply current of 1.7mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 33.98dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 2 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. The quiescent current is 1.7mA. It is important that the op amp resistance stays within the range of 10 T?.

INA155E/250G4 Features

8 Pins
supply voltage of 5V
33.98dB voltage gain
Resistance of 10 T?

INA155E/250G4 Applications

There are a lot of Texas Instruments
INA155E/250G4 Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.