TI INA152EA/250G4

Manufacturer No:

INA152EA/250G4

Manufacturer:

Package:

VSSOP

Description:

2 Channels 80 dB Instrumentational OP Amps 8 Pins VSSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

INA152EA/250G4 information

TI INA152EA/250G4 technical specifications, attributes, parameters and parts with similar specifications to TI INA152EA/250G4.

Type
Parameter

Package / Case
VSSOP

Surface Mount
YES

Number of Pins
8

Weight
25.996513mg

Packaging
Tape and Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

ECCN Code
EAR99

Resistance
80kOhm

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
10V

Terminal Pitch
0.65mm

Pin Count
8

Temperature Grade
INDUSTRIAL

Number of Channels
2

Max Supply Voltage
20V

Min Supply Voltage
2.7V

Nominal Supply Current
500μA

Quiescent Current
500μA

Slew Rate
0.4 V/μs

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
80 dB

Input Offset Voltage (Vos)
1.5mV

Bandwidth
800 kHz

Gain Bandwidth Product
800 kHz

Neg Supply Voltage-Nom (Vsup)
-10V

Voltage Gain
0dB

Max Dual Supply Voltage
10V

Min Dual Supply Voltage
1.35V

Dual Supply Voltage
9V

Height
970μm

Length
3mm

Width
3mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI INA152EA/250G4.

INA152EA/250G4 Overview

In order to protect the op amps, a VSSOP case is used. There are two types of operational amplifiers in this circuit. In the case of Tape and Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 10V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. Maintain 0dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85°C degrees. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 20V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 10V. There is an 500μA quiescent current in linear amplifier. It is important to keep the resistance within the 80kOhm range of the op amps.

INA152EA/250G4 Features

8 Pins
supply voltage of 10V
0dB voltage gain
Resistance of 80kOhm

INA152EA/250G4 Applications

There are a lot of Texas Instruments
INA152EA/250G4 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.