TI INA141UG4

Manufacturer No:

INA141UG4

Manufacturer:

Package:

SOIC

Description:

1 Channels 15mA per Channel 5nA 117 dB Instrumentational OP Amps 8 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

INA141UG4 information

TI INA141UG4 technical specifications, attributes, parameters and parts with similar specifications to TI INA141UG4.

Type
Parameter

Package / Case
SOIC

Surface Mount
YES

Number of Pins
8

Weight
75.891673mg

Packaging
Rail/Tube

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

ECCN Code
EAR99

Resistance
10GOhm

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Instrumentation Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
15V

Pin Count
8

Number of Elements
3

Temperature Grade
INDUSTRIAL

Number of Channels
1

Min Supply Voltage
4.5V

Operating Supply Current
750μA

Nominal Supply Current
800μA

Quiescent Current
750μA

Slew Rate
4 V/μs

Amplifier Type
INSTRUMENTATION AMPLIFIER

Common Mode Rejection Ratio
117 dB

Current - Input Bias
5nA

Output Current per Channel
15mA

Input Offset Voltage (Vos)
50μV

Bandwidth
1MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Max Dual Supply Voltage
18V

-3db Bandwidth
1MHz

Min Dual Supply Voltage
2.25V

Dual Supply Voltage
15V

Voltage Gain-Min
10

Input Voltage Noise Density
8nV/sqrt Hz

Voltage Gain-Nom
10

Non-linearity-Max
0.004%

Voltage Gain-Max
100

Length
4.9mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI INA141UG4.

INA141UG4 Overview

Packaging for the buffer amplifier is in the form of a SOIC case. A INSTRUMENTATION AMPLIFIER-type buffer amplifier is shown here. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriInstrumentation Amplifiered as a Instrumentation Amplifier-type device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. Using a supply current of 750μA , this buffer op amp will be able to operate. 1 channels are available on the instrumentation amplifier. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 85°C degrees. A total of 3 elements are present in this linear amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 4.5V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 18V volts for this part. As a result, linear amplifier's quiescent current is 750μA. There are a maximum of 10 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. It is recommended to keep the buffer amps resistance within the range of 10GOhm.

INA141UG4 Features

8 Pins
supply voltage of 15V
Resistance of 10GOhm

INA141UG4 Applications

There are a lot of Texas Instruments
INA141UG4 Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.