TI INA126UG4
Manufacturer No:
INA126UG4
Manufacturer:
Package:
SOIC
Description:
1 Channels 10mA per Channel 25nA 83 dB Instrumentational OP Amps 0.05?A 8 Pins SOIC
Quantity:
Delivery:
Payment:
In Stock :Available
Price not displayed? Please send an RFQ, and we will respond immediately.
INA126UG4 information
TI INA126UG4 technical specifications, attributes, parameters and parts with similar specifications to TI INA126UG4.
- Type
- Parameter
- Package / Case
- SOIC
- Surface Mount
- YES
- Number of Pins
- 8
- Weight
- 75.891673mg
- Packaging
- Rail/Tube
- JESD-609 Code
- e4
- Moisture Sensitivity Level (MSL)
- 3 (168 Hours)
- Number of Terminations
- 8
- ECCN Code
- EAR99
- Resistance
- 1GOhm
- Terminal Finish
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Max Operating Temperature
- 125°C
- Min Operating Temperature
- -55°C
- Subcategory
- Instrumentation Amplifier
- Terminal Position
- DUAL
- Terminal Form
- GULL WING
- Peak Reflow Temperature (Cel)
- 260
- Number of Functions
- 1
- Supply Voltage
- 15V
- Pin Count
- 8
- Number of Elements
- 2
- Temperature Grade
- INDUSTRIAL
- Number of Channels
- 1
- Max Supply Voltage
- 36V
- Operating Supply Current
- 175?A
- Nominal Supply Current
- 200?A
- Max Supply Current
- 200?A
- Quiescent Current
- 175?A
- Slew Rate
- 0.04 V/?s
- Amplifier Type
- INSTRUMENTATION AMPLIFIER
- Common Mode Rejection Ratio
- 83 dB
- Current - Input Bias
- 25nA
- Output Current per Channel
- 10mA
- Input Offset Voltage (Vos)
- 250?V
- Bandwidth
- 200 kHz
- Neg Supply Voltage-Nom (Vsup)
- -15V
- Voltage Gain
- 80dB
- Average Bias Current-Max (IIB)
- 0.05?A
- Power Supply Rejection Ratio (PSRR)
- 106dB
- Max Dual Supply Voltage
- 18V
- -3db Bandwidth
- 200 kHz
- Min Dual Supply Voltage
- 1.35V
- Dual Supply Voltage
- 15V
- Input Offset Current-Max (IIO)
- 0.005?A
- Input Voltage Noise Density
- 35nV/sqrt Hz
- Voltage Gain-Nom
- 100
- Height
- 1.58mm
Download datasheets and manufacturer documentation for TI INA126UG4.
INA126UG4 Overview
There is a SOIC case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the INSTRUMENTATION AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Rail/Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Instrumentation Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 250?V. The buffer amplifier is capable of operating from a supply current of 175?A . It is recommended to keep the voltage gain at 80dB at all times. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -55°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 2. Under 36V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. 175?A quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 1GOhm range, the op amp should be tested.
INA126UG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA126UG4 Applications
There are a lot of Texas Instruments
INA126UG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
User Guide
Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.
MEANS OF PAYMENTFor your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.
RFQ (REQUEST FOR QUOTATIONS)Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.
Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.
Step1：Prepare product
Step2：Desiccant Protection
Step3：Vacuum Packaging
Step4：Individual Package
Step5：Anti-collision Filling
Step6：Packaging Box
1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
DELIVERY TIME1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.
INA126UG4 Relevant information
The following parts are popular search parts in Integrated Circuits (ICs).
AIChipLink – Your Trusted Electronic Components Distributor
12.28 M
Listed Part Number
3,000+
Leading Manufacturers
4.9 M
In-stock SKU
15,000+
Warehouse Area(㎡)