Renesas IDT74FCT2374ATQG

Manufacturer No:

IDT74FCT2374ATQG

Manufacturer:

Renesas

Package:

SSOP

Description:

8 Bit Flip Flop DUAL 20 Pins SSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

IDT74FCT2374ATQG information

Renesas IDT74FCT2374ATQG technical specifications, attributes, parameters and parts with similar specifications to Renesas IDT74FCT2374ATQG.

Type
Parameter

Mount
Surface Mount

Package / Case
SSOP

Number of Pins
20

Published
2009

JESD-609 Code
e3

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
20

Terminal Finish
Matte Tin (Sn) - annealed

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
FF/Latches

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.635mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
20

Qualification Status
Not Qualified

Operating Supply Voltage
5V

Number of Elements
1

Power Supplies
5V

Temperature Grade
INDUSTRIAL

Max Supply Voltage
5.25V

Min Supply Voltage
4.75V

Load Capacitance
50pF

Number of Ports
2

Number of Bits
8

Propagation Delay
6.5 ns

Turn On Delay Time
2 ns

Family
FCT

Output Characteristics
3-STATE WITH SERIES RESISTOR

Logic IC Type
BUS DRIVER

High Level Output Current
12mA

Low Level Output Current
15mA

Clock Edge Trigger Type
Positive Edge

Width
3.937mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for Renesas IDT74FCT2374ATQG.

Datasheets:

integrateddevicetechnology-idt74fct2374atqg-datasheets-0845.pdf

IDT74FCT2374ATQG Overview

The flip flop is packaged in SSOP. In total, there are 1 elements. Currently, there are 20 terminations. The D flip flop is powered by a voltage of 5V . Devices in the FCTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 8bits is used in this application. It runs on 5Vvolts of power. A D flip flop with 2embedded ports is available. If high efficiency is desired, the supply voltage should be kept at 5V. 12mA is set as the high level output current. In the low level output current setting, 15mAis used. It is recommended that the operating temperature be below 85°C. Ideally, the operating temperature should be higher than -40°C. A minimum supply voltage of 4.75V is required for these RS flip flops to operate. In this case, it supports a maximum supply voltage of 5.25V. It uses a logic IC with a BUS DRIVER value. A total of 1 functions are available on the T flip flop. There are 20 pins on the D latch.

IDT74FCT2374ATQG Features

20 pins
8 Bits
5V power supplies
1 Functions
20 pin count

IDT74FCT2374ATQG Applications

There are a lot of Integrated Device Technology (IDT)
IDT74FCT2374ATQG Flip Flops applications.

Bounce elimination switch
Data storage
Data transfer
Latch
Registers
Memory
Frequency division
Memory
Event Detectors
Data Synchronizers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.