IDT23S08-1HPG8-Renesas-Price, Stock & Datasheet

IDT23S08-1HPG8 Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the TSSOP package. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. There are 16 terminations found in the file. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from LVTTL, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. Designed to operate at low temperatures, this frequency generator performs 0°C operations per second. There is still a possibility of the electronic frequency generator working at 70°C with attenuated performance. As a result, it is commonly classified as a type of Clock Drivers clock PLL. The maximal same edge skew (tskwd) can not be exceeded. 8 pins are configured for high true output enable in this clock generator. This PLL belongs to the family of 23S. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device.