IDT2308A-2DCGI8-Renesas-Price, Stock & Datasheet

IDT2308A-2DCGI8 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. As part of the SOIC package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVTTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 133.3MHz frequency is provided by this clock-based RF synthesizer. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. It is a 16-bit clock PLL designed specifically for microprocessors. There are -40°C operations that can be performed on this clock generator, which has impressive low-temperature performance. At 85°C, this RF synthesizer remains functional despite reduced performance. In general, this clock PLL is considered a Clock Drivers device. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. The digital clock generator has 8 high-enable output pins. By searching for parts that belong to the 2308 family, you can find electronic parts that are similar. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator.