TI ICL7652P

Manufacturer No:

ICL7652P

Manufacturer:

Package:

8-DIP (0.300, 7.62mm)

Description:

1 Channels 4pA 110 dB Instrumentational OP Amps 0.00003μA 8V 3.8V~16V ±1.9V~8V ICL7652 8 Pins 8-DIP (0.300, 7.62mm)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ICL7652P information

TI ICL7652P technical specifications, attributes, parameters and parts with similar specifications to TI ICL7652P.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Factory Lead Time
6 Weeks

Mounting Type
Through Hole

Package / Case
8-DIP (0.300, 7.62mm)

Surface Mount
NO

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tube

Series
LinCMOS™

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifier

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
5V

Base Part Number
ICL7652

Pin Count
8

Operating Supply Voltage
8V

Number of Elements
2

Operating Supply Current
1.5mA

Nominal Supply Current
2.4mA

Power Dissipation
1W

Slew Rate
3.1V/μs

Architecture
CHOPPER-STAB

Amplifier Type
Zero-Drift

Common Mode Rejection Ratio
110 dB

Current - Input Bias
4pA

Voltage - Supply, Single/Dual (±)
3.8V~16V ±1.9V~8V

Input Offset Voltage (Vos)
5μV

Bandwidth
1.9MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Unity Gain BW-Nom
1900 kHz

Voltage Gain
150dB

Average Bias Current-Max (IIB)
0.00003μA

Low-Offset
YES

Frequency Compensation
YES

Supply Voltage Limit-Max
8V

Voltage - Input Offset
600μV

Low-Bias
YES

Micropower
NO

Bias Current-Max (IIB) @25C
0.00003μA

Programmable Power
NO

Download datasheets and manufacturer documentation for TI ICL7652P.

PCN Design/Specification:

texasinstruments-sn74hc373n-pcndesignspecification-9663.pdf

texasinstruments-tl852cn-pcndesignspecification-5419.pdf

ICL7652P Overview

A 8-DIP (0.300, 7.62mm) case is used to package the op amp. Zero-Drift-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 1.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS™ indicates the series number of the op amp.

ICL7652P Features

8 Pins
supply voltage of 5V
150dB voltage gain

ICL7652P Applications

There are a lot of Texas Instruments
ICL7652P Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.