Renesas ICL7650SCPD

Manufacturer No:

ICL7650SCPD

Manufacturer:

Renesas

Package:

DIP

Description:

30mA per Channel 4pA 140 dB Instrumentational OP Amps 0.00002?A 9V 14 Pins DIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ICL7650SCPD information

Renesas ICL7650SCPD technical specifications, attributes, parameters and parts with similar specifications to Renesas ICL7650SCPD.

Type
Parameter

Mount
Through Hole

Package / Case
DIP

Number of Pins
14

Published
1999

JESD-609 Code
e0

Part Status
Discontinued

ECCN Code
EAR99

Terminal Finish
Tin/Lead (Sn/Pb)

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
2.54mm

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
14

Qualification Status
Not Qualified

Operating Supply Voltage
9V

Temperature Grade
COMMERCIAL

Max Supply Voltage
16V

Operating Supply Current
2mA

Nominal Supply Current
2mA

Slew Rate
2.5 V/?s

Architecture
CHOPPER-STAB

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
140 dB

Current - Input Bias
4pA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
700?V

Bandwidth
2MHz

Gain Bandwidth Product
2MHz

Neg Supply Voltage-Nom (Vsup)
-5V

Unity Gain BW-Nom
2000 kHz

Voltage Gain
150dB

Average Bias Current-Max (IIB)
0.00002?A

Low-Offset
YES

Frequency Compensation
YES

Low-Bias
YES

Micropower
NO

Programmable Power
NO

Dual Supply Voltage
5V

Power
NO

Number of Amplifiers
1

Download datasheets and manufacturer documentation for Renesas ICL7650SCPD.

Datasheets:

intersil-icl7650scpd-datasheets-1083.pdf

ICL7650SCPD Overview

In order to protect the op amps, a DIP case is used. There are two types of operational amplifiers in this circuit. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 700?V. In order for this instrumentation amplifier to operate, the supply current needs to be between 2mA and 10 . Maintain 150dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below 0°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 70°C degrees. The operating supply voltage of the buffer op amp is rated at 9V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 16V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 4.5V when using it. A linear amplifier such as this has 1 amplifiers on it.

ICL7650SCPD Features

14 Pins
supply voltage of 5V
150dB voltage gain

ICL7650SCPD Applications

There are a lot of Intersil (Renesas Electronics America)
ICL7650SCPD Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.