FT2232D

Manufacturer No:

FT2232D

Manufacturer:

Package:

LFQFP, QFP48,.35SQ,20

Description:

USB Full Speed to Dual Channel Serial UART/FIFO/JTAG/SPI/I2C IC, LQFP-48 USB 2.0 Slave to Dual UART / FIFO Converter NOT RECOMMENDED FOR NEW DESIGN (NRND)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FT2232D information

FT2232D technical specifications, attributes, parameters and parts with similar specifications to FT2232D.

Type
Parameter

Data Rates
3MBaud

USB Speed
Full Speed (12Mbps)

USB Transfer Modes
Bulk

Interfaces
UART, FIFO, MPSSE, Fast serial, 8051 MCU emulation, 8 GPIOs

USB Host
No

Packages
48-pin LQFP

Channels
2

I/O Voltage
3.3V to 5V

USB Class
Vendor

Virtual Com Port
Yes

Operating Temperature
-40°C to +85°C

Download datasheets and manufacturer documentation for FT2232D.

Datasheet:

2180b8c8ffcd9be498b9e02d43ae254c.pdf

FT2232D – Dual USB UART/FIFO IC

Please note that this product is NOT RECOMMENDED FOR NEW DESIGN (NRND).

The FT2232D is the 3rd generation of FTDI’s popular USB UART/FIFO IC. The FT2232D is an updated version of the FT2232C and its lead free version, the FT2232L. Please note that the FT2232D is not a new generation of device.

The FT2232D is lead free and pin compatible with the original FT2232C and FT2232L devices. All the original device features are supported with some additional features available including a CPU-style FIFO mode and an extended operating temperature range.

This device features two multi-purpose UART/FIFO controllers which can be configured individually in several different modes. As well as a UART interface, a FIFO interface and the Bit-Bang IO mode of the 2nd generation FT232B and FT245B devices, the FT2232D offers a variety of additional new modes of operation including a Multi-Protocol Synchronous Serial Engine (MPSSE) interface which is designed specifically for synchronous serial protocols such as I2C, JTAG and SPI bus.

FT2232D is available in 48 Pin LQFP packaging.

Key Hardware Features

Single chip USB <=> dual channel serial/parallel ports with a variety of configurations
Entire USB protocol handled on the chip: no USB-specific firmware programming required
FT232B-style UART interface option with full handshaking & modem interface signals
UART interface supports 7/8 data bits, 1/2 stop bits and Odd/Even/Mark/Space/No Parity
Data transfer rate of 300 Baud => 1M Baud (RS232)
Data transfer rate of 300 Baud => 3M Baud (TTL and RS422/RS485)
Auto transmit enable control for RS485 serial applications using TXDEN pin
In-built support for event characters and line break condition
Transmit and receive LED drive signals on each channel
FT245B-style FIFO interface option with bi-directional data bus and simple 4-wire handshaking interface
Data transfer rate up to 1M Byte/second (Parallel FIFO)
Enhanced Bit-Bang Mode interface option with RD# and WR# strobes
New Synchronous Bit-Bang Mode interface option
New Multi-Protocol Synchronous Serial Engine (MPSSE) interface option
New CPU-style FIFO interface mode option (FT2232D only)
New MCU Host Bus Emulation Mode option
New Fast Opto-Isolated Serial Interface Mode option
High I/O pin output drive option
Interface mode and USB description strings configurable in external EEPROM
EEPROM configurable on-board via USB
Support for USB suspend and resume conditions via PWREN# and SI/WU pins
Support for bus powered, self powered and high-power bus powered USB configurations
Integrated Power-On-Reset circuit with optional reset input and reset output pins
5V and 3.3V logic IO interfacing with independent level conversion on each channel
Integrated 3.3V LDO regulator for USB IO
Integrated 6MHz – 48Mhz clock multiplier PLL
USB Bulk data transfer modes
4.35V to 5.25V single supply operating voltage range
Low operating and USB suspend current
UHCI/OHCI/EHCI host controller compatible
USB 2.0 Full Speed (12M bits/second) compatible
Extended -40°C to 85°C industrial operating temperature range (FT2232D only)
Compact 48-LD lead free LQFP package (RoHS compliant)
FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
Dedicated Windows DLLs available for USB to JTAG, USB to SPI and USB to I2C applications

Package

Partial, Tray or Reel

Part No:	FT2232D (qty 1-249)	Package Type:	Partial (Cut Tape)
Part No:	FT2232D-TRAY (qty 250-999)	Package Type:	TRAY
Part No:	FT2232D-REEL (qty >=1000)	Package Type:	REEL

Application Areas

USB to Dual Port RS232 Converters
USB to Dual Port RS422/RS485 Converters
Upgrading Legacy Peripheral Designs to USB
USB Instrumentation
USB JTAG Programming
USB to SPI Bus Interfaces
USB Industrial Control
Field Upgradeable USB Products
Galvanically Isolated Products with USB Interface
USB to synchronous serial interface
Cellular and cordless phone USB data transfer cables and interfaces.
Interfacing MCU/PLD/FPGA based designs to USB
USB Audio and Low Bandwidth Video data transfer
PDA to USB data transfer
USB Smart Card Readers
USB Instrumentation
USB Industrial Control
USB MP3 Player Interface
USB FLASH Card Readers/Writers
Set Top Box PC – USB interface
USB Digital Camera Interface
USB Bar Code Readers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.